|
Engine Specs
If you have desktop dyno and dragstrip plus or something
can you please tell us what our Horsepower, Tourque, ET, 60 ft time, etc.
is predicted to be?
It is a Chevelle SS with a 454 engine, predicted weight
4100 lbs. Driver weight @ 200 lbs.
4 core radiator
Head:
Open Chamber
oval ports
Valve size: Intake, 2.19 Exhaust, 1.88
Roller tip rockers, est. ratio 1.55:1
Excellent Port job
Engine:
Engine size 454 bored .030 over or 461
Dome Pistons, ratio 10:1
Crank cross drilled for oil flowage
double roller timing chain
Edelbrock performer 2-0 intake
Holley 750 dbl pumper with 1"spacer
Aftermarket HEI, 8mm wires
Rear and Tires:
4.10 posi traction
12 bolt
SSM lift bars
boxed upper control arms.
10 inch BFGRadials in the back 26.7" high
7 inch BFGradial in front, height unknown.
Steel rallye wheels
Disc in front drums in back
Cam:
I don't know how to interpret this card so can you please
look at this scanned card full of specs and decipher it for me? Here
is the picture: CamCard
Heres what I think might need from card
Hydraulic Cam
Total Duration: 280
Dur. @ .050 lift: 230 Intake and Exhaust
Valve Lift: .520"
Cam overlap: 50
Cam Timing: 0 degrees
Other/Misc:
Cowl Induction (functioning)
Fuel: 110 octane
Headers: 1 3/4 or 2"
Stock exhaust except headers as stated above
Fresh rebuilt engine/complete overhaul
TH400 with B&M shift kit
2500 Stall
Can you please e-mail me with the results like what our
Horsepower, Tourque, ET, 60 ft time, etc. is predicted to be?
|
